VU+
Vu+ Solo SE V2 BLACK Full HD Twin Tuner 1080p Dual DVB-S2 Linux
- SKU:
- VUPLUSSEV2B
- EAN:
- 8809288540756
- Shipping:
- Calculated at Checkout
Description
DISCONTINUED - ALTERNATIVE VU+ MODELS AVAILABLE HERE
100% GENUINE VU+ STOCK!!!
VU+ SOLO SEV2 BLACK FULL HD TWIN TUNER 1080P DUAL DVB-S2 LINUX PVR READY
Vu Plus Solo SEV2 - The new generation. The Linux-based high-end Twin Tuner Full HD Receiver provides an unprecedented multimedia experience. Full HD 1080p digital satellite receiver for digital TV and radio programs. The main feature is the 1300-MHz processor the VuPlus Solo SE and its hot-swapabble Dual DVB-S2 tuner. Experience high definition TV with your Vu+ Solo SE. Advanced pluggable tuner system for DVB-S2 and DVB-C/T/T2 available. Dual DVB-S2 tuner included as standard.
- Twin Tuner DVB-S2
- Transcoding function
- Opera Browser
- HbbTV
- HDMI 1.4
- HD PIP
- 100 M/Bit LAN
- Plug & Play Tuner
- External 12 V power supply
Available Discounted Options: SAVE!!! To order one of the discounted options just check the appropriate box above before clicking 'Add To Cart'
- No charge - FREE HDMI Lead and FREE 8GB USB Memory Stick
- FREE HDMI Lead, FREE 8GB USB Memory Stick plus Long Range USB Wifi Dongle £12.95
- FREE HDMI Lead, FREE 8GB USB Memory Stick plus 1TB External Hard Disk Drive installed and tested £75.00
- FREE HDMI Lead, FREE 8GB USB Memory Stick, USB Wifi Dongle, 1TB External Hard Disk Drive £85.00
Vu+ Solo SE Technical Highlights:
1300 MHz Dual Core Mips processor
Plug & Play Dual Tuner (DVB-S2, DVB-C / T, DVB-C/T/T2)
256MB Flash
1 GB DDR3 DRAM
1 x DVB Common Interface slot
1 x Smartcard-Reader (Xcrypt)
2 x USB
10/100 Mbit Ethernet Interface
SPDIF audio output optical (digital)
1 x HDMI 1.4 video / audio output (digital)
1 x RCA video output
2 x Audio output (L / R) RCA (analog)
unlimited channel lists for TV / Radio
EPG (electronic program guide) support
Support of Bouquet lists
OSD in many languages and skin-support
automatic / manual channel search
DiSEqC 1.0/1.1/1.2, USALS
External 12V power supply
power switch
Vu+ Solo SE Specifications:
Dual DVB-S2 tuner
Input Frequency Range 950 .. 2150 MHz
Input Level - 65 dBm ... - 25 dBm
Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC capture range + / - 3.5 MHz
Demodulation QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbiraten 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35%
Common Interface:
Common-Interface Power Consumption max. 0.35 A/5V
Video decoding:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G / 25 Hz, NTSC
4:3 / 16:9
Letterbox for 4:3 TV-Device
Output Digital:
Output Level 0,5 Vss on 75 Ohm
Sampling frequencies of 32 kHz, 44.1 kHz, 48 kHz
S / PDIF-Output optical, coaxial (AC3)
Audio coding:
MPEG-1 audio compression and MPEG-2 Layer I and II, MP3
Audio Mode Dual (main / sub), Stereo
Sampling frequencies of 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Analog output:
Output Level L / R 0,5 Vss on 600 Ohm
THD> 60 dB (1 kHz)
Crosstalk <-65 dB
Video parameter:
Input Level FBAS 1 Vss + / - 0.25 dB on 75 Ohm
Ethernet:
100/10 MBit compatible interface
USB:
USB 2.0 port (2x)
LNB power supply DVB-S2 Tuner:
LNB Current 400mA max. , Short-circuit proof
LNB Voltage horizontal "no load 19.5V" 17,6 V at 400mA
LNB Voltage vertical "no load 14.5V" 11,8 V at 400mA
LNB is switched off in standby mode goldwafers.com
Control of the satellite position:
DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control
Power consumption:
<13W (in operation, with LNB)
<12W (in operation, without LNB)
<0.5 W (Deep-Standby-Mode)
External power supply:
entrance:
110-240V AC / 50-60Hz / 1,0 A
exit:
12V = / 3,5 A
General:
Ambient temperature +15 ° C. .. +35 ° C
Humidity <80%
Dimensions (W x D x H): 211 mm x 185 mm x 40 mm
Vu+ Solo SE V2 is supplied with:
Receiver (Vu+ Solo SE)
Remote Control
Batteries
External IR sensor
External power supply
User manual
Please Note: This box is offered for sale to competent enthusiasts with knowledge of networking, FTP, and Telnet/SSH