Technomate TM-RF HD IR 4K HDMI Modulator

TECHNOMATE TM-RF 4K IR HDMI TO RF DVB-T MODULATOR

4K UHD VERSION!

CONVERT AN HDMI SIGNAL INTO A HIGH DEFINITION / 4K UHD DIGITAL TERRESTRIAL CHANNEL

SEND SKY HD, SKYQ, VIRGIN, CCTV OR OTHER DEVIC AS A TUNABLE HD/4K CHANNEL ON YOUR DIGITAL TV

The world's first 4K HDMI modulator with 9V IR!

The Technomate TM-RF HD IR 4K can accept an HDMI signal up to 4K60 4:4:4 HDR, HDMI 2.0 with HDCP 2.2 and it will pass this same 4K signal on the HDMI loopout so that you have the original 4K video/audio signal on the HDMI output (for example, when connecting to a 4K TV).

The modulator will then downscale the 4K resolution to 1080p only on the RF output for your coaxial cable system*.

With current 1080p HDMI modulators, if you are using a source device that supports 4K (such as SkyQ, CCTV DVR/NVR, etc), the modulator cannot support a 4K HDMI input, therefore you have to reduce your source device's HDMI resolution to 1080p or you have to buy a separate down-scaler device. The all-in-one TM-RF HD IR 4K will accept a 4K HDMI input and has a down-scaler built-in.

In an example install scenario, you may have a mixture of 4K and 1080p TVs. For your 4K TV, you want to watch in 4K so you can connect the HDMI loopout of the modulator to this TV and the other TVs you can use the RF output of the modulator and connect this to an aerial amplifier (sold separately) so that you can watch the 1080p RF on multiple TVs*.*1080p Freeview TV required.

Key Features:

• HDMI DVB-T RF Modulator
• HDMI 2.0 Input (up to 4K60 4:4:4 HDR HDCP 2.2)
• 1080p/4K UHD High-Definition over RF
• 9V Infra-Red including IR Eye
• Converts an HDMI signal into an HD Digital DVB-T compatible signal
• HDMI Loop-though
• Cascadable with Easy ConfigRequires a DVB-T or DVB-T2 compatible TV (must be 1080p or 4K UHD)

Any HDMI Source

Connect any HDMI device such as a Satellite Receiver, CCTV system, Blu-ray player, TV Box, etc and watch it in crystal clear Full HD 1080p over a coaxial RF system. You can also watch on many TVs using a passive splitter or an amplifier (explained below).

Can be used with existing RF systems
If you already have a Standard Definition RF distribution system but your source device is in High-Definition, just swap your existing RF modulator to this and watch in High-Definition 1080p Full HD on a DVB-T compatible TV. The cabling is exactly the same. *please note, TV must be 1080p Full HD or 4K UHD (HD Ready models are not compatible).

Control your source device from any room
The amazing RF Infra-Red technology allows you to control your source device from any TV using the same coaxial cable. It includes an IR Transmitter which has to be placed in front of your source device. It also includes an IR Receiver ("Magic Eye") to allow remote control from the second TV. If you would like to control from more TVs, please refer to Watch on Multiple TVs below.

Watch on Mutliple TVs
- Infra-Red: Requires a mains powered amplifier/splitter, also known as a bypass amplifier/splitter which can send the 9V IR Infra-Red remote control signal so that you can control the source device via remote control at every TV. The Technomate TM-AMP B models are compatible. Additional Infra-Red Receivers ("Magic Eyes") are also available.
- Passive Splitter: Requires a dc pass splitter to split the audio/video to multiple TVs.

Minimal Delay
The fastest in the industry! Less than 0.8s delay from the HDMI device, making channel changes super fast. The quickest in the industry! Furthermore, if using for video only devices such as a CCTV system, this can be reduced to less than 0.5s making mouse movement extremely quick (please contact Technomate Support for further details).

Crystal Clear Picture Quality
1080p Full HD at its best, giving you the same picture quality as an HDMI cable.

International
Apart from the UK Channel 21-69 frequencies, the TM-RF HD IR is also compatible with all UHF international RF systems.

Connect Multiple Sources
Can also be cascaded with up to 35 TM-RF HD IRs in one system so you can watch different devices on different TVs! Such as Satellite on TV1, another Satellite channel on TV2, CCTV on TV3, etc.

To make cascading even easier and save time, you can upload the data to a USB device and configure the settings on your PC for each TM-RF HD IR and then download those settings back into the modulator.

Installation Notes:
- Compatibility: please note that this only works on 1080p Full HD & 4K UHD TVs. If your TV is 720p HD Ready, it will not work directly however, you can use a Freeview HD box (DVB-T2 box) with the TM-RF HD IR to make it work on an HD Ready TV.
- Lip Sync: the TM-RF HD IR has been tested with many devices such as Sky, Virgin, BT, Blu-ray Players, Playstation, Xbox without any issues.
- Extra IR Eyes are available for multiple TVs

Technical Specification:

• HDMI DVB-T RF Modulator
• 1080p/4K UHD High-Definition over RF
• 9V Infra-Red over RF (via on/off switch)
• HDMI Loop-through
• Cascadable
• Send 1080p/4K UHD High-Definition video quality with audio over an RF distribution system
• Converts an HDMI signal into an HD digital DVB-T compatible signal
• Requires a DVB-T or DVB-T2 compatible TV (must be 1080p or 4K UHD)
• LCD screen for easy setup & configuration
• HDMI Input
• DVB-T COFDM Modulation
• Channel Name Edit
• Compatible with international standards
• Bandwidth - 6Mhz, 7Mhz, 8Mhz
• Configure: Bandwidth, Constellation, FEC, ONID, LCN
• USB - software and cascade updates only
• Includes IR Transmitter and 9V IR Receiver (Eye)
• Wall Mountable Metal Housing